- TRAVEL CAGES
- >
- STACK, STAY & PLAY
- >
- PVC REPLACEMENT PARTS (1/2")
PVC REPLACEMENT PARTS (1/2")
SKU:
$8.00
1
12
$1.00 - $12.00
Unavailable
per item
Want extra 3-way corner pieces for your single level Stack, Stay-n-Play?
Need replacement 4-way corner pieces that allow you to stack your Stack, Stay-n-Play travel cage?
Want some extra wheel connectors, just in case?
We have them here!
The 1/2" 3-way adapters fit at the corner junctions of your single level Stack, Stay-n-Play, creating the cube frame that supports your cage.
The 1/2" 4-way adapters fit at the top corner junctions of your bottom Stack, Stay-n-Play, and the bottom corner junctions of your top Stack, Stay-n-Play, allowing them to be stacked on top of each other.
The 1/2" Threaded T goes in the center back frame, fitting snuggly against the small opening, and allows your wheel to connect to the frame from the inside.
The Threaded Elbow fits into the Threaded T (from the inside) and prevents escapes through the hole when the wheel isn't attached.
The Slip Plug fits into the end of the Threaded Elbow, to close opening.
*Note: The Stack, Stay-n-Play needs a total of 8 corner pieces for each unit. For single units, they require a total of (8) 3-way connectors. For double stacked units, they require a total of (8) 3-way connectors and (8) 4-way connectors. For triple stacked units, they require a total of (8) 3-way connectors and (16) 4-way connectors.
Need replacement 4-way corner pieces that allow you to stack your Stack, Stay-n-Play travel cage?
Want some extra wheel connectors, just in case?
We have them here!
The 1/2" 3-way adapters fit at the corner junctions of your single level Stack, Stay-n-Play, creating the cube frame that supports your cage.
The 1/2" 4-way adapters fit at the top corner junctions of your bottom Stack, Stay-n-Play, and the bottom corner junctions of your top Stack, Stay-n-Play, allowing them to be stacked on top of each other.
The 1/2" Threaded T goes in the center back frame, fitting snuggly against the small opening, and allows your wheel to connect to the frame from the inside.
The Threaded Elbow fits into the Threaded T (from the inside) and prevents escapes through the hole when the wheel isn't attached.
The Slip Plug fits into the end of the Threaded Elbow, to close opening.
*Note: The Stack, Stay-n-Play needs a total of 8 corner pieces for each unit. For single units, they require a total of (8) 3-way connectors. For double stacked units, they require a total of (8) 3-way connectors and (8) 4-way connectors. For triple stacked units, they require a total of (8) 3-way connectors and (16) 4-way connectors.
Only a few left!